WSQ Supervise Safe Lifting Operations (SSLO)
Overview
Overview
The “Supervise Safe Lifting Operations” course is aimed at providing individuals with the knowledge and skills to supervise the crane operator in the manoeuvre of a load safely to its destination. The WSH (Operations of Cranes) Regulations stipulates that: Appointment and duties of a lifting supervisors
Participants who are Singapore Citizens or Singapore Permanent Residents (SPR) sponsored by Company or Individuals are eligible for the Skills Development Fund (SDF) Funding administrated by the SkillsFuture Singapore Agency (SSG). Individuals can however apply for SkillsFuture Credits to pay for their training (only applicable for Singaporeans aged 25 and above). For further informations, log on to myskillsfuture.gov.sg.
Course Content
- Prepare to supervise safe lifting operations
- Carry out supervision of safe lifting operations
- Supervise reinstatement of safe lifting operations
Course Objective
On completion of this unit, learners will have knowledge and skills in preparing to supervise safe lifting operations. Carry out supervision of safe lifting operations. Supervise reinstatement of safe lifting operations
For Whom
The Supervise Safe Lifting Operations Course is suitable for aspiring and experienced individuals assigned as Lifting Supervisor in the workplace.
Entry Requirement
Learners must have completed WSQ/ MOM Rigging and Signalman course or Marine Rigger and Signalman course. Have relevant experience in lifting operations for at least 3 months [ supported by Company /Individual Application Letter to indicate periods of relevant experience in lifting operations]. Be 21 years old and above And are assumed to: Be able to listen and speak English at a proficiency level equivalent to the Employability Skills (ES) level 4. Be able to read and write English at a proficiency level equivalent to ES level 4. Be able to manipulate numbers at a proficiency level equivalent to ES level 4; and be medically fit
Document Submission
Valid Work Permit / S Pass / Employment Pass / NRIC copy / Valid Passport copy
Certification
Section A MCQ 75 Qns passing criteria is 65%, Section B MCQ 5 Qns passing criteria is 100%. Answering any question in Section B incorrectly results in IMMEDIATE FAILURE of the entire course assessment. Practical Performance will be the best method to assess candidates’ competence to “Supervise Safe Lifting Operations”.
Upon successful completion of the Course, a “Statement of Attainment” (SOA) from SSG, and a card from Global Training Services, will be issued to all participants.
FAQ
Multiskill
Worker able to attend 2 cert with different trade
Coretrade
Construction Registration of Tradesmen, or CoreTrade, is a registration scheme administered by the Building and Construction Authority (BCA) for skilled and experienced construction personnel in the various key construction trades.
Worker able to attend 2 cert with different trade
Coretrade
Construction Registration of Tradesmen, or CoreTrade, is a registration scheme administered by the Building and Construction Authority (BCA) for skilled and experienced construction personnel in the various key construction trades.
As MOM require, all construction firms must have at least 10% of their work permit holders (WPHs) to be qualified as “Higher Skilled” R1 workers. Construction personnel registered under the Multi-skilling Scheme are qualified as “Higher Skilled” R1 workers under the Ministry of Manpower (MOM)’s Foreign Worker Levy Scheme.
Worker’s NRIC (for Singaporean and Singapore PR) or valid work permit/employment pass (for foreigner)(front and back in a single page)
Multiskill
– Worker’s NRIC (for Singaporean and Singapore PR) or valid work permit/employment pass (for foreigner)(front and back in a single page)
– Min 4 years experience in construction sector in Singapore
1) Have two (2) recognised Skills Evaluation Certiifcate [ SEC/SEC(K) ] of different trades
2) Have a minimum of four (4) years of construction experience in Singapore
Or
1) One (1) Skills Evaluation Certificate [ SEC/SEC(K) ]
2) Have a minimum of six (6) years of construction experience in Singapore;
3) Completed 120 hours of training in approved safety-related courses.
Or
1) One (1) Skills Evaluation Certificate [ SEC/SEC(K) ]
2) Have a minimum of six (6) years of construction experience in Singapore.
3) Obtained WSQ Advanced Certificate in Workplace Safety and Health.
Coretrade
1. Worker’s NRIC (for Singaporean and Singapore PR) or valid work permit/employment pass (for foreigner)(front and back in a single page)
2. Min 4 years experience in construction sector in Singapore
3. Apply Acknowledgement Notice (AN)
– Worker’s NRIC (for Singaporean and Singapore PR) or valid work permit/employment pass (for foreigner)(front and back in a single page)
– Min 4 years experience in construction sector in Singapore
1) Have two (2) recognised Skills Evaluation Certiifcate [ SEC/SEC(K) ] of different trades
2) Have a minimum of four (4) years of construction experience in Singapore
Or
1) One (1) Skills Evaluation Certificate [ SEC/SEC(K) ]
2) Have a minimum of six (6) years of construction experience in Singapore;
3) Completed 120 hours of training in approved safety-related courses.
Or
1) One (1) Skills Evaluation Certificate [ SEC/SEC(K) ]
2) Have a minimum of six (6) years of construction experience in Singapore.
3) Obtained WSQ Advanced Certificate in Workplace Safety and Health.
Coretrade
1. Worker’s NRIC (for Singaporean and Singapore PR) or valid work permit/employment pass (for foreigner)(front and back in a single page)
2. Min 4 years experience in construction sector in Singapore
3. Apply Acknowledgement Notice (AN)
For the construction sector, the maximum number of years a worker can work in Singapore on a Work Permit is as follows:
NTS (India, Sri Lanka, Thailand, Bangladesh, Myanmar, Philippines), PRC (China) in Basic Skilled – 14 years
NTS (India, Sri Lanka, Thailand, Bangladesh, Myanmar, Philippines), PRC (China) in Higer Skilled – 26 years
NTS (India, Sri Lanka, Thailand, Bangladesh, Myanmar, Philippines), PRC (China) in Basic Skilled – 14 years
NTS (India, Sri Lanka, Thailand, Bangladesh, Myanmar, Philippines), PRC (China) in Higer Skilled – 26 years
Multiskill
1. Valid Work Pass
2. Valid Passport
3. WP Online (Download form MOM Website)
4. SEC(K) Certificate 5. Acknowledgement Notice (AN) *Can apply after course
Coretrade
1. Valid Work Pass
2. Valid Passport
3. WP Online (Download form MOM Website)
4. Acknowledgement Notice (AN)
1. Valid Work Pass
2. Valid Passport
3. WP Online (Download form MOM Website)
4. SEC(K) Certificate 5. Acknowledgement Notice (AN) *Can apply after course
Coretrade
1. Valid Work Pass
2. Valid Passport
3. WP Online (Download form MOM Website)
4. Acknowledgement Notice (AN)
Multiskill
Yes, as long as the candidates is holding NRIC (for Singaporean and Singapore PR) or valid work permit/employment pass (for foreigner)
Coretrade
No, it is only available for construction worker and over 4 years constryction experience in Singapore
Yes, as long as the candidates is holding NRIC (for Singaporean and Singapore PR) or valid work permit/employment pass (for foreigner)
Coretrade
No, it is only available for construction worker and over 4 years constryction experience in Singapore
The Direct R1 Scheme was implemented, on 1 Sep 2015, to provide another alternative pathway for the industry to upgrade their construction workers. It allows those who pass the Skills Evaluation Certificate (Knowledge), SEC(K), test at higher skill level and draw a fixed monthly salary of $1,600 or more, to be considered as R1 (Higher Skilled) workers; under the Ministry of Manpower Tiered-Levy Scheme.
Multiskill
Yes, you may proceed to request statement (SEC(K)). Its is cost $24 nett and 10 working days processing time.
Coretrade
Yes, there is NO upload require SEC(K) cert for coretrade registration
Yes, you may proceed to request statement (SEC(K)). Its is cost $24 nett and 10 working days processing time.
Coretrade
Yes, there is NO upload require SEC(K) cert for coretrade registration
Multiskill
1. Valid Work Pass
2. Valid Passport
3. WP Online (Download form MOM Website)
4. SEC(K) Certificate 5. Acknowledgement Notice (AN) *Can apply after course
Coretrade
1. Valid Work Pass
2. Valid Passport
3. WP Online (Download form MOM Website)
4. Acknowledgement Notice (AN)
1. Valid Work Pass
2. Valid Passport
3. WP Online (Download form MOM Website)
4. SEC(K) Certificate 5. Acknowledgement Notice (AN) *Can apply after course
Coretrade
1. Valid Work Pass
2. Valid Passport
3. WP Online (Download form MOM Website)
4. Acknowledgement Notice (AN)
Once the test end, BCA will release the result to ATTC after 10 working days, and the certificate will be take around 1 month to receieved.
After received the cert, HR may proceed to apply the acknowledgement notice (AN) for upgrading. Its take 14 to 28 working days.
When AN is ready, company may monitor the levy rate as it is auto lower the levy.
Every 2 years
A notice to notify MOM to upgrade the worker from R2 to R1
Course Content
- Prepare to supervise safe lifting operations
- Carry out supervision of safe lifting operations
- Supervise reinstatement of safe lifting operations
Course Objective
On completion of this unit, learners will have knowledge and skills in preparing to supervise safe lifting operations. Carry out supervision of safe lifting operations. Supervise reinstatement of safe lifting operations
For Whom
The Supervise Safe Lifting Operations Course is suitable for aspiring and experienced individuals assigned as Lifting Supervisor in the workplace.
Entry Requirement
Learners must have completed WSQ/ MOM Rigging and Signalman course or Marine Rigger and Signalman course. Have relevant experience in lifting operations for at least 3 months [ supported by Company /Individual Application Letter to indicate periods of relevant experience in lifting operations]. Be 21 years old and above And are assumed to: Be able to listen and speak English at a proficiency level equivalent to the Employability Skills (ES) level 4. Be able to read and write English at a proficiency level equivalent to ES level 4. Be able to manipulate numbers at a proficiency level equivalent to ES level 4; and be medically fit
Document Submission
Valid Work Permit / S Pass / Employment Pass / NRIC copy / Valid Passport copy
Certification
Section A MCQ 75 Qns passing criteria is 65%, Section B MCQ 5 Qns passing criteria is 100%. Answering any question in Section B incorrectly results in IMMEDIATE FAILURE of the entire course assessment. Practical Performance will be the best method to assess candidates’ competence to “Supervise Safe Lifting Operations”.
Upon successful completion of the Course, a “Statement of Attainment” (SOA) from SSG, and a card from Global Training Services, will be issued to all participants.
