Overview

The “Supervise Metal Scaffold Erection” is a mandatory WSH training course for all workers supervising scaffolding works in construction sites and related industries. Under the Workplace Safety and Health (WSH) 2006 Act, all persons who perform metal scaffold erection in the building and construction industry must take the metal scaffold erector course and be certified to ensure safety on the job. Under the WSH (Scaffolds) Regulations: “The scaffold supervisor shall be a person who has undergone a course of training approved by the Commissioner” – Regulation 6(1).

Participants who are Singapore Citizens or Singapore Permanent Residents (SPR) sponsored by Company or Individuals are eligible for the Skills Development Fund (SDF) Funding administrated by the SkillsFuture Singapore Agency (SSG). Individuals can however apply for SkillsFuture Credits to pay for their training (only applicable for Singaporeans aged 25 and above). For further informations, log on to myskillsfuture.gov.sg.

Course Content

Theory:

1. Type of scaffold systems and their characteristics
2. Criteria for selection of scaffolds
3. Terminology used in scaffolds as well as its components and materials
4. Tools, equipment and personal protective equipment used in scaffold activities
5. Material requirement for scaffolds
6. Work platform requirement for scaffolds
7. Independent tied scaffolds
8. Frame scaffold – Characteristics andmaterial requirement
9. Material estimation
10. Hazards identification
11. Birdcage scaffold – Characteristics
12. Requirement of ties and brace
13. Tower scaffold – Characteristics and types
14. Modular scaffold and the systems
15. Suspended scaffold and its characteristics
16. Special scaffold and its types
17. Overview of WSH (Scaffolds) Regulations for scaffold activities
18. Relevant case studies on scaffold incidents
19. Types of commonly used checklists
20. Essential information for the scaffold register
21. Factors affecting safety of scaffold structure

Practical:
Erection and dismantling of the following scaffold in line with safe work procedures, general principles and requirements of WSH (Scaffold) Regulations and CP 14:-

1. Frame scaffold
2. Birdcage scaffold
3. Tower scaffold
4. Modular scaffold, including cup lock system scaffold
5. Suspended scaffold
6. Special scaffold

Course Objective

On completion of this unit, learners will have knowledge and skills in supervising scaffold erection and dismantling work activities in construction and other industries.

For Whom

This course is designed for all workers involved in supervising scaffold erection and dismantling work activities in construction and other industries.

Entry Requirement

Learners are assumed to have successfully completed the Metal Scaffold Erection Course. Proof of entry requirement includes the submission of Certificate of Successful Completion or WSQ Certificate of Attainment (SOA). Employability Skills (ES) Workplace Literacy level 4 and above. Be able to manipulate numbers at a proficiency level equivalent to ES Workplace Numeracy level 4 and above.

Document Submission

Valid Work Permit / S Pass / Employment Pass / NRIC copy / Valid Passport copy

Certification

Please note that 100% attendance is mandatory for this course

Passing Criteria:
Written Assessment – Section A – 30 MCQ, Section B – 5 Fill in the Blanks Short / Long Questions, Overall- 65%
Practical Assessment – Competent
Learner must pass BOTH parts of the written assessments
Course attendance: 100% attendance
Late comers will not be allowed to sit for the test.

Upon successful completion of the Course, a “Statement of Attainment” (SOA) from SSG, and a card from Global Training Services, will be issued to all participants.

FAQ

What are Multi Skills and Core Trade courses?

Multiskill
Worker able to attend 2 cert with different trade

Coretrade
Construction Registration of Tradesmen, or CoreTrade, is a registration scheme administered by the Building and Construction Authority (BCA) for skilled and experienced construction personnel in the various key construction trades.

What is R1?

As MOM require, all construction firms must have at least 10% of their work permit holders (WPHs) to be qualified as “Higher Skilled” R1 workers. Construction personnel registered under the Multi-skilling Scheme are qualified as “Higher Skilled” R1 workers under the Ministry of Manpower (MOM)’s Foreign Worker Levy Scheme.

Who can attend Multi Skills and Core Trade course?

Worker’s NRIC (for Singaporean and Singapore PR) or valid work permit/employment pass (for foreigner)(front and back in a single page)

What is the criteria to attend the Multi Skills or Core Trade course for low levy?

Multiskill
– Worker’s NRIC (for Singaporean and Singapore PR) or valid work permit/employment pass (for foreigner)(front and back in a single page)
– Min 4 years experience in construction sector in Singapore
1) Have two (2) recognised Skills Evaluation Certiifcate [ SEC/SEC(K) ] of different trades
2) Have a minimum of four (4) years of construction experience in Singapore
Or
1) One (1) Skills Evaluation Certificate [ SEC/SEC(K) ]
2) Have a minimum of six (6) years of construction experience in Singapore;
3) Completed 120 hours of training in approved safety-related courses.
Or
1) One (1) Skills Evaluation Certificate [ SEC/SEC(K) ]
2) Have a minimum of six (6) years of construction experience in Singapore.
3) Obtained WSQ Advanced Certificate in Workplace Safety and Health.

Coretrade
1. Worker’s NRIC (for Singaporean and Singapore PR) or valid work permit/employment pass (for foreigner)(front and back in a single page)
2. Min 4 years experience in construction sector in Singapore
3. Apply Acknowledgement Notice (AN)

How much will the levy be lowered after the worker attends Multi Skills / Core Trade course?

What are the benefits for R1 worker?

For the construction sector, the maximum number of years a worker can work in Singapore on a Work Permit is as follows:
NTS (India, Sri Lanka, Thailand, Bangladesh, Myanmar, Philippines), PRC (China) in Basic Skilled – 14 years
NTS (India, Sri Lanka, Thailand, Bangladesh, Myanmar, Philippines), PRC (China) in Higer Skilled – 26 years

How to apply to upgrade my workers to R1?

Multiskill
1. Valid Work Pass
2. Valid Passport
3. WP Online (Download form MOM Website)
4. SEC(K) Certificate 5. Acknowledgement Notice (AN) *Can apply after course

Coretrade
1. Valid Work Pass
2. Valid Passport
3. WP Online (Download form MOM Website)
4. Acknowledgement Notice (AN)

Worker is currently under other sector, is he able to register for Multi Skills or Core Trade course?

Multiskill
Yes, as long as the candidates is holding NRIC (for Singaporean and Singapore PR) or valid work permit/employment pass (for foreigner)

Coretrade
No, it is only available for construction worker and over 4 years constryction experience in Singapore

What is a direct R1 scheme?

The Direct R1 Scheme was implemented, on 1 Sep 2015, to provide another alternative pathway for the industry to upgrade their construction workers. It allows those who pass the Skills Evaluation Certificate (Knowledge), SEC(K), test at higher skill level and draw a fixed monthly salary of $1,600 or more, to be considered as R1 (Higher Skilled) workers; under the Ministry of Manpower Tiered-Levy Scheme.

Worker misplaced the Skills Evaluation Certificate (K) cert, is he able to attend the Multi Skills or Core Trade course?

Multiskill
Yes, you may proceed to request statement (SEC(K)). Its is cost $24 nett and 10 working days processing time.

Coretrade
Yes, there is NO upload require SEC(K) cert for coretrade registration

What are the documents needed to submit for registration of Multi Skills or Core Trade course?

Multiskill
1. Valid Work Pass
2. Valid Passport
3. WP Online (Download form MOM Website)
4. SEC(K) Certificate 5. Acknowledgement Notice (AN) *Can apply after course

Coretrade
1. Valid Work Pass
2. Valid Passport
3. WP Online (Download form MOM Website)
4. Acknowledgement Notice (AN)

How long is the processing time to lower levy?

Once the test end, BCA will release the result to ATTC after 10 working days, and the certificate will be take around 1 month to receieved. After received the cert, HR may proceed to apply the acknowledgement notice (AN) for upgrading. Its take 14 to 28 working days. When AN is ready, company may monitor the levy rate as it is auto lower the levy.

How long is the renewal process for R1?

Every 2 years

What is an Acknowledgement Notice (AN)?

A notice to notify MOM to upgrade the worker from R2 to R1

Theory:

1. Type of scaffold systems and their characteristics
2. Criteria for selection of scaffolds
3. Terminology used in scaffolds as well as its components and materials
4. Tools, equipment and personal protective equipment used in scaffold activities
5. Material requirement for scaffolds
6. Work platform requirement for scaffolds
7. Independent tied scaffolds
8. Frame scaffold – Characteristics andmaterial requirement
9. Material estimation
10. Hazards identification
11. Birdcage scaffold – Characteristics
12. Requirement of ties and brace
13. Tower scaffold – Characteristics and types
14. Modular scaffold and the systems
15. Suspended scaffold and its characteristics
16. Special scaffold and its types
17. Overview of WSH (Scaffolds) Regulations for scaffold activities
18. Relevant case studies on scaffold incidents
19. Types of commonly used checklists
20. Essential information for the scaffold register
21. Factors affecting safety of scaffold structure

Practical:
Erection and dismantling of the following scaffold in line with safe work procedures, general principles and requirements of WSH (Scaffold) Regulations and CP 14:-

1. Frame scaffold
2. Birdcage scaffold
3. Tower scaffold
4. Modular scaffold, including cup lock system scaffold
5. Suspended scaffold
6. Special scaffold

Please note that 100% attendance is mandatory for this course

Passing Criteria:
Written Assessment – Section A – 30 MCQ, Section B – 5 Fill in the Blanks Short / Long Questions, Overall- 65%
Practical Assessment – Competent
Learner must pass BOTH parts of the written assessments
Course attendance: 100% attendance
Late comers will not be allowed to sit for the test.

Upon successful completion of the Course, a “Statement of Attainment” (SOA) from SSG, and a card from Global Training Services, will be issued to all participants.