WSQ Apply Workplace Safety And Health In Construction Sites (CSOC)
Overview
WSQ “Apply Workplace Safety and Health in Construction Sites” is a mandatory WSH training course for all workers working in construction. Construction workers are required to go through the course before they start work. The Workplace Safety and Health (Factories, Safety Training Courses order – clause 2 (6)) stipulates that “Any worker employed in manual labour to carry out construction work in building and engineering construction worksites must undergo a safety and health training course approved by the Commissioner for Workplace Safety and Health.”
Participants who are Singapore Citizens or Singapore Permanent Residents (SPR) sponsored by Company or Individuals are eligible for the Skills Development Fund (SDF) Funding administrated by the SkillsFuture Singapore Agency (SSG). Individuals can however apply for SkillsFuture Credits to pay for their training (only applicable for Singaporeans aged 25 and above). For further informations, log on to myskillsfuture.gov.sg.
Course Content
The Competency Elements covered are:
- Identify own roles and responsibilities as an employee in a construction job
- Follow safe work procedures in a construction job
- Follow safe “Work-at-Height” procedures
- Respond to fire emergencies
After the course, the trainees should be able identify their own roles and responsibilities in a construction job, follow safe work procedures, adopt relevant risk control measures when working at height and respond to fire emergencies.
For Whom
The “Apply Workplace Safety and Health in Construction Sites” is a mandatory WSH training course for all workers working in construction sites.
Entry Requirement
Learners must be above 18 years of age and are assumed to have employment status as manual labour to carry out construction work in building and engineering construction worksites. Be medically fit. Be able to listen, read, speak and write English at a proficiency level equivalent to the Employability Skills (ES) level 2. Be able to manipulate numbers at a proficiency level equivalent to Employability Skills (ES) level 2. Have good organisational skills. Be able to follow written and oral work instructions
Document Submission
Valid Work Permit / S Pass / Employment Pass / NRIC copy / Valid Passport copy
Certification
Candidates must pass both the Written Assessment (MCQ) and Practical Performance to be considered to have successfully completed the “Apply Workplace Safety and Health in Construction Sites” Course.
Upon successful completion of the Course and assessed as competent, all participants will be issued a Card from Global Training Services.
FAQ
Worker able to attend 2 cert with different trade
Coretrade
Construction Registration of Tradesmen, or CoreTrade, is a registration scheme administered by the Building and Construction Authority (BCA) for skilled and experienced construction personnel in the various key construction trades.
As MOM require, all construction firms must have at least 10% of their work permit holders (WPHs) to be qualified as “Higher Skilled” R1 workers. Construction personnel registered under the Multi-skilling Scheme are qualified as “Higher Skilled” R1 workers under the Ministry of Manpower (MOM)’s Foreign Worker Levy Scheme.
Worker’s NRIC (for Singaporean and Singapore PR) or valid work permit/employment pass (for foreigner)(front and back in a single page)
– Worker’s NRIC (for Singaporean and Singapore PR) or valid work permit/employment pass (for foreigner)(front and back in a single page)
– Min 4 years experience in construction sector in Singapore
1) Have two (2) recognised Skills Evaluation Certiifcate [ SEC/SEC(K) ] of different trades
2) Have a minimum of four (4) years of construction experience in Singapore
Or
1) One (1) Skills Evaluation Certificate [ SEC/SEC(K) ]
2) Have a minimum of six (6) years of construction experience in Singapore;
3) Completed 120 hours of training in approved safety-related courses.
Or
1) One (1) Skills Evaluation Certificate [ SEC/SEC(K) ]
2) Have a minimum of six (6) years of construction experience in Singapore.
3) Obtained WSQ Advanced Certificate in Workplace Safety and Health.
Coretrade
1. Worker’s NRIC (for Singaporean and Singapore PR) or valid work permit/employment pass (for foreigner)(front and back in a single page)
2. Min 4 years experience in construction sector in Singapore
3. Apply Acknowledgement Notice (AN)
NTS (India, Sri Lanka, Thailand, Bangladesh, Myanmar, Philippines), PRC (China) in Basic Skilled – 14 years
NTS (India, Sri Lanka, Thailand, Bangladesh, Myanmar, Philippines), PRC (China) in Higer Skilled – 26 years
1. Valid Work Pass
2. Valid Passport
3. WP Online (Download form MOM Website)
4. SEC(K) Certificate 5. Acknowledgement Notice (AN) *Can apply after course
Coretrade
1. Valid Work Pass
2. Valid Passport
3. WP Online (Download form MOM Website)
4. Acknowledgement Notice (AN)
Yes, as long as the candidates is holding NRIC (for Singaporean and Singapore PR) or valid work permit/employment pass (for foreigner)
Coretrade
No, it is only available for construction worker and over 4 years constryction experience in Singapore
The Direct R1 Scheme was implemented, on 1 Sep 2015, to provide another alternative pathway for the industry to upgrade their construction workers. It allows those who pass the Skills Evaluation Certificate (Knowledge), SEC(K), test at higher skill level and draw a fixed monthly salary of $1,600 or more, to be considered as R1 (Higher Skilled) workers; under the Ministry of Manpower Tiered-Levy Scheme.
Yes, you may proceed to request statement (SEC(K)). Its is cost $24 nett and 10 working days processing time.
Coretrade
Yes, there is NO upload require SEC(K) cert for coretrade registration
1. Valid Work Pass
2. Valid Passport
3. WP Online (Download form MOM Website)
4. SEC(K) Certificate 5. Acknowledgement Notice (AN) *Can apply after course
Coretrade
1. Valid Work Pass
2. Valid Passport
3. WP Online (Download form MOM Website)
4. Acknowledgement Notice (AN)
The Competency Elements covered are:
- Identify own roles and responsibilities as an employee in a construction job
- Follow safe work procedures in a construction job
- Follow safe “Work-at-Height” procedures
- Respond to fire emergencies
Valid Work Permit / S Pass / Employment Pass / NRIC copy / Valid Passport copy
Candidates must pass both the Written Assessment (MCQ) and Practical Performance to be considered to have successfully completed the “Apply Workplace Safety and Health in Construction Sites” Course.
Upon successful completion of the Course and assessed as competent, all participants will be issued a Card from Global Training Services.
GT Author
About Instructor
Teacher Courses
SkillsFuture Singapore (SSG) - WSQ, Workplace Safety & Health
WSQ SUPERVISE WORKPLACE SAFETY AND HEALTH FOR FORMWORK CONSTRUCTION
(No Ratings Yet)
Loading...
